Cisco III - Supervisor Engine III Message Manual page 256

Cisco ios system message guide

Table of Contents

SIP600 Messages

Error Message %SIP600-2-UNRECOVERABLE_FAILURE: SIP-600 Unrecoverable Failure

SIP600-3

Error Message %SIP600-3-IO_BUS_ERR_INT: IO Bus Error Interrupt: [hex] - Deadman

Timer = [hex] Trans Status = [hex] Last Address = [hex] Last Data = [hex]

Error Message %SIP600-3-NMI: NMI Reset Status = [hex]

Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY

2-226

An unexpected fatal condition has occurred on the SIP 600. This message indicates a

Explanation

hardware failure or malfunction. The system will reload to attempt to fix the problem. See the

previous error on the console or in the system log for specific details about the condition.

If the problem persists, copy the message exactly as it appears on the console

Recommended Action

or in the system log. Research and attempt to resolve the issue using the tools and utilities provided

at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying

information. Search for resolved software issues using the Bug Toolkit at

http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the

Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or

contact your Cisco technical support representative and provide the representative with the

information you have gathered. Attach the following information to your case in nonzipped,

plain-text (.txt) format: the output of the show logging and show tech-support commands and your

pertinent troubleshooting logs.

An I/O bus error interrupt has occurred.

Explanation

Copy the message exactly as it appears on the console or in the system log.