Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message %CWANLC-3-CWANLC_EARL_VERSION_NOTICE: CWAN receives mismatch Earl
version notification. New Earl[int] vs Earl[int]
Explanation
switching engine on the module has changed. This message occurs during a switchover operation.
The version of the EARL switching engine is specified in the message text.
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %CWANLC-3-FATAL: [chars]
Explanation
Recommended Action
Research and attempt to resolve the issue using the tools and utilities provided at
http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying
information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
information you have gathered. Attach the following information to your case in nonzipped,
plain-text (.txt) format: the output of the show logging and show tech-support commands and your
pertinent troubleshooting logs.
Error Message %CWANLC-3-TVPN_NOMEM: Failed to start vpn, not enough memory
Explanation
Recommended Action
upgrade to a larger memory configuration. If this message recurs, copy the message exactly as it
appears on the console or in the system log. Research and attempt to resolve the issue using the tools
and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities
will supply clarifying information. Search for resolved software issues using the Bug Toolkit at
http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the
Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or
contact your Cisco technical support representative and provide the representative with the
OL-11469-02
The RP determined through an SCP find operation that the version of the EARL
Copy the message exactly as it appears on the console or in the system log.
The OSM encountered a fatal error.
Copy the message exactly as it appears on the console or in the system log.
The OSM could not start VPN due to insufficient memory.
Reduce other system activity to ease memory demands. If conditions warrant,
Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY
CWANLC Messages
2-73
Advertisement
Table of Contents
