Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual page 411

11 MIDI 11 (Express)
12—15 MIDI 12—15
16—19 MIDI 16—19 (Ctl A—D)
20—31 MIDI 20—31
64 MIDI 64 (Sustain)
This is the standard MIDI controller number for Sustain. The control assignment
parameter FootSw1 is set by default to MIDI controller 64, so a switch pedal on
your MIDI controller which sends MIDI 64 will send sustain messages to the K2vx
by default. The K2vx will always respond to sustain messages by sustaining cur-
rently active notes.
65 MIDI 65 (PortSw)
This is the standard MIDI controller number for Portamento Switch. The Porta-
mento parameter on the COMMON page in the Program Editor always responds
to this controller, and will turn Portamento on for monophonic programs when the
controller signal is at 64 or above. It wonÕt affect polyphonic programs.
66 MIDI 66 (SostPD)
MIDI controller 66 is defined as Sostenuto Switch. The control assignment param-
eter FootSw2 is set by default to MIDI controller 66, so a switch pedal on your MIDI
controller which sends MIDI 66 will send sostenuto messages to the K2vx by de-
fault. The K2vx will always respond to sostenuto messages.
67 MIDI 67 (SoftPd)
This is the standard MIDI controller number for Soft Pedal. The K2vx will always
respond to Soft pedal messages.
68 MIDI 68
69 MIDI 69 (FrezPd)
The K2vx will always respond to this message. It causes all notes to be frozen at
their current amplitude levels while the function is on.
70—74 MIDI 70—74
75 MIDI 75 (LegatoSw)
The K2vx always responds to this message. When a MIDI controller 75 message
with a value above 64 is received, the K2vx will force polyphonic programs to be
monophonic.
Control Sources
Descriptions of Control sources
25-5