Edit Song: Track Functions - Reference Quantize - Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual

Grid: 1/1 Ð 1/384
This setting determines the size of the Quantize grid, expressed as a fraction of a Bar with a 4/4
meter. Set Grid to 1/1 for whole note grid, 1/16 for sixteenth notes. All of the standard note
durations and every fractional Bar divisions in-between are available as the size of the Input
Quantize grid. The double button press for quickly selecting Grid values is pressing the
Increment/Decrement at the same time.
Swing: -99% Ð 125%(defaults as 0%)
The Swing percentage is applied to the quantize grid. Zero percent swing is straight time, 100%
produces a swing feel (triplet feel). A positive Swing value determines how close every other
grid location is moved to a point 1/3 of the way towards the next grid point. Negative Swing
moves every other grid location closer to a point 1/3 of the way towards the previous grid
point.
Shift: -26.020 Ð 26.020 (Beats and Ticks, 480 Ticks = 1 Beat)
In addition to quantizing the selected note events to speciÞed grid locations in varying
amounts, the Quantizing function allows you to offset the original note locations forward and
backward in time any number of ticks (1/480th of a Beat) up to @ 26 Beats, before aligning them
to Grid locations. Shift is used to compensate for any notes played too early or late.
Region / Criteria Window
Release: Yes / No
Set the Release parameter to Yes if you would like each quantized note eventÕs Note Off
message to be aligned to the Grid location nearest to the time the key was originally released.
Edit Song: Track Functions – Reference Quantize
The Reference Quantize function is similar to the Quantize function in that it aligns Note events
to a grid. The difference is that the grid locations are not mathematically perfect divisions of a
Bar. Instead, Reference Quantize deÞnes the grid based on the timing of note events from a
previously recorded reference track.
RefSong: 1 NewSong
The previously recorded reference track can be selected from any Song object currently residing
in the RAM memory. Select the Song containing the desired reference track as the RefSong
value.
RefTrack: 1 Ð 16
The RefTrack value is set to the track number of the desired Reference Track in the Reference
Song. The timing of this trackÕs note events is used as the Grid that other tracks will reference
when being Referenced Quantized.
EditSong:TRACK|||||||||||||||<>Track:1||
Function:RefQuantd|From||:||1:1|To:||2:1
RefSong|:1|NewSond||||||||||||||||||||||
RefTrack:1|||||||d|LoKey|:C|-1||Hi:G|9||
Timing||:100%||||d|LoVel|:0|||||Hi:127||
Velocity:Off|||||d|Width|:1/8|||||||||||
Locate||:||1:1|||'%%^^^^^^^^%%%%%%^%%%%%
FromTo||Play|||Stop||||||||||Go||||Done|
Edit Song: Track Functions – Reference Quantize
Song Mode
12-37