Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual page 141

basic (but correct), then make additions later. To keep track of where you are, watch the
ßashing Song mode LED or the Locat parameter on the SongMode:MAIN page.
12. Press the Stop soft button when youÕve Þnished recording the drums.
ConÞrm that you want to keep the changes to your song by pressing the Yes soft button
followed by the Replace soft button.
Record a Bass Line
When you are satisÞed with your drum loop, you can begin using it as the foundation for a
song. What weÕll do here is set Record Mode to "unloop" while leaving Play mode set to loop.
This means that the drum loop will keep playing while we record new material of any length.
The endpoint of the song will change to reßect the length of the newly recorded material.
1. Press the MISC soft button to bring up the SongMode:MISC page.
2. Set the RecMode parameter to "Unloop". Leave the PlayMode parameter set to "Loop".
Depending on the type of song you are recording, you may also want to turn quantization
off before you record your bass part.
SongMode:MISC||Events:186K|||STOPPED||||
RecMode|:UnLoop|Quant:100%||CountOff:1||
PlayMode:Loop|||Grid|:1/16||Click|||:Rec
KeyWait|:Off||||Swing:0%||||ClickCh|:16|
Locate||:||1:1||Sync|:Both||ClickPrg:198
AutoIn||:||1:1||Clock:Int|||ClickKey:C|4
AutoOut|:||1:1||Tempo:Auto||ClickVel:90|
Record||Play|||Stop|||New|||In/Out|MAIN|
3. Press the MAIN soft button to return to the SongMode:MAIN page.
4. Set the record track (RecTrk) to track 2.
This track already has
material recorded on it.
SongMode:MAIN||Events:186K|||STOPPED||||
CurSong:200*NewSong||||||||||Tempo:120||
RecTrk|:2||||Vol:127|Pan:64||Mode|:Merge
Program:80|Mix|Bass||||||||||Locat:||1:1
||||||||[|||||||||||||||||||||||||||||||
Track||:P|R|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
Track status indicators: track 1 is set to "Play", track 2 is set to "Record".
Tracks 3 through 16 are empty.
Since you previously assigned "Mix Bass" to channel 2, it should appear in the Program
Þeld when you set track 2 as the record track. Note, too, that the track status indicator for
Song Mode
Getting Started with the Sequencer
12-7