Edit Song: Track Functions - Shift - Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual

Table of Contents

Advertisement

Song Mode
Edit Song: Track Functions – Shift
Timing: Off / 1% Ð 100%
The Timing parameter determines how much the selected note events are moved towards grid
locations. If set to Off, no aligning of previously recorded Notes to grid locations will occur. If
set to 100%, every recorded note event will be aligned to the closest grid location, deÞned by
the timing of note events from the reference track. Notes will be moved to a position half way
between the grid location and the original Note event location if Quant is set to 50%.
Velocity: Off / 1% Ð 100%
In addition to referencing the timing of note events on the reference track, you may also scale
the attack velocities of the note events being quantized to velocity values closer or identical to
the velocities played on the reference track.
Leave the Velocity parameter set to Off if you just want to reference the note event timing when
reference quantizing. Set Velocity to 100% in order to have the note events being quantized to
have velocity values matching those of the note events on the reference track. A setting of 50%
will change the velocities to values half way between the values originally played and the
values of the velocities on the reference track.
Region / Criteria Window
Width: 1/1 Ð 1/384
The Width setting determines the duration of a window of time centered around each of the
referenced grid locations. If a note event on the track being quantized happens during this
window of time, it will be moved closer to the referenced grid location according to the Timing
percentage. Note events occurring outside this window of time remain unquantized.
Edit Song: Track Functions – Shift
The Shift function allows you to offset the existing MIDI events forward or backward in time
any number of ticks (1/480th of a Beat) up to approximately 26 Beats. This function does not
affect the End point.
Events can not be shifted beyond the End point or before Bar 1 : Beat 1. The events can be
shifted only as far as these temporal boundaries. All events that canÕt be shifted the full Ticks
amount will be placed at the boundary location.
Ticks: -26.020 Ð 26.020 (Beats and Ticks, 480 Ticks = 1 Beat)
The Ticks parameter speciÞes the number of Beats and Ticks that the MIDI events, from within
the selected region, are moved forward or backward in time relative to their original locations.
12-38
EditSong:TRACK|||||||||||||||<>Track:1||
Function:Shift|||d|From||:||1:1|To:||2:1
Ticks|||:0.000|||d|Events:Pitchbend|||||
|||||||||||||||||d||||||||||||||||||||||
|||||||||||||||||d||||||||||||||||||||||
|||||||||||||||||d||||||||||||||||||||||
Locate||:||1:1|||'%%^^^^^^^^%%%%%%^%%%%%
FromTo||Play|||Stop||||||||||Go||||Done|

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K2vxK2vxrK2500rs

Table of Contents