Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual page 315

and press the Link soft button again. The arrow will change to a colon, indicating that the link
has been removed.
As a convenience, the Song mode button also serves as a link button while in the Sample Editor.
Name, Save, Delete, and Dump
These soft buttons are similar to the Name, Save, Delete, and Dump soft buttons in the other
editors, initiating the corresponding dialogs to name, save, delete, or dump the currently
selected sample.
When you press the Save soft button, and choose to save the sample to a new ID, the K2vx will
ask you if you want to copy the sample data. If you answer Yes, the K2vx will make a separate
copy of the sample. If you answer No, the K2vx will simply mark the location of the original
sample data and share the sample between the original and the edited sample. This can save a
great deal of memory space. If you delete a sample thatÕs partially or completely shared with
another, the K2vx deletes only the portions that are unused by the shared sample, always
optimizing its memory for maximum storage capacity.
Note that if you use the Utility function to view the objects currently stored in the K2vx, youÕll
see each object listed separately, including shared samples. The shared samples will each
indicate their size, even though theyÕre referring to the same memory location. This might lead
you to believe that youÕre using more memory for samples than you actually are. If you use the
Utility function to calculate your total sample memory usage, remember not to include any
shared samples in the total.
The Page Buttons
The soft buttons labeled in all capital letters select the various pages in the Sample Editor:
MISC, TRIM, and LOOP (as well as DSP when youÕre editing RAM samples).
Miscellaneous (MISC)
On the MISC page, youÕll set several parameters that affect the behavior of the current sample.
These parameters affect the entire sample. The diagram of the MISC page shows a ROM
sample, and since the DSP functions cannot be applied to ROM samples, the DSP soft button is
not available. In its place is the Link soft button, which enables you to maintain equal times
between various points in the sampleÑStart and Alt, for example.
The default values shown in this diagram reßect the settings for the Default program 199.
EditRomSample:MISC||||||||||||||||||||||
RootKeyNum||:G#1||||LoopSwitch:On|||||||
PitchAdjust|:-12ct||Playback||:Normal|||
VolumeAdjust:0.0dB||AltSense||:Norm|||||
AltVolAdjust:-0.5dB|IgnRelease:Off||||||
DecayRate|||:3bB/s||SampleSize=101Kb||||
ReleaseRate|:106dB/|SampleRate=19200Hz||
<more|||MISC|||TRIM|||LOOP|||Link||more>
PARAMETER
Root Key Number
Pitch Adjust
Volume Adjust
Alternative Volume Adjust
RANGE OF VALUES
C -1 to G 9
Variable (depends on sample rate)
-64.0 to 63.5 dB
-64.0 to 63.5 dB
Sampling and Sample Editing
Editing Samples
15-11