Macro Entries - Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual

Macro Entries

Each Þle load operation that is recorded into the Macro Table is called a Macro entry. While
Macro Record is enabled, you have the option of either loading Þles into the K2vx or just
adding Þles to the Macro without actually loading them.
Each Macro entry stores information about how a disk Þle should be loaded. Each entry is
displayed as a single item in a scrollable list on the Macro page, with various Þelds indicating
the parameters of the entry. This picture shows how the Macro page might look once 4 Þles
have been entered into the table:
Func:MACRO|[Record]||||||||||Index:|||1|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|3:\DRUMS\REALKITS.KRZ|||||||||200:F:Obj
|3:\BASSES\WALKING.KRZ|||||||||200:F:|||
|3:\KEYS\CHROMA12.KRZ||||||||||200:F:|||
|F:\SONG42.KRZ|||||||||||||||||200:F:|||
Select||Modify||Load|||Pause||Off||Exit|
The following chart describes the information stored in a Macro entry, and also tells how to the
understand the settings of a displayed Macro entry:
Disk drive ID
Directory path/file
name
Bank
This represents what drive the file is to be loaded from. There are 10 pos-
sible values:
The numbers 0-7 represent SCSI 0 through SCSI 7.
The letter 'F' represents the Floppy drive.
The letter 'U' means Unspecified drive. (see below)
The letter 'L' means the Library drive. (see below)
This is the directory path and the file name of the file on the disk to be
loaded by this Macro entry. This is displayed to the right of the Disk
drive ID, following a colon, using as many characters as needed that will
fit in the display (up to 28). The internal Macro Table can store any path
length, however.
The bank that the file should be loaded into. This will have a value from
0 through 900 (by 100s), or the letter 'E' for Everything. This field is the
first field to the right of the path/file name in the display.
Disk Mode
Macros
13-45