Kurzweil K2000 - MUSICIANS GUIDE Musician's Manual page 147

The parameter(s) below RecTrk will change according to the value of RecTrk and whether or
not you select a setup. If RecTrk is set to a single track (1-16), Program is displayed and you can
select the program to be assigned to that track. If you change RecTrk to Mult or None, the
display changes to show the Channel parameter followed by the Program parameter (although
the the word "Program" no longer appears). An example of this is shown in the screen below. If
you switch through the channels, the program will also change, showing the program currently
on that channel. Finally, if RecTrk is set to Mult, then if you go directly to Setup Mode and then
back to Song mode, the parameter changes to Setup, allowing you to choose a setup with which
to record.
Program
Scroll through the Program objects in memory to select the Program before initially recording
each track of your Song. Any MIDI program changes on the current RecTrk or Chan will cause
the ID# and name of the trackÕs program to change during playback.
This parameterÕs name, Program, is not present on the display when the RecTrk is set to None
or Multi (to make room for the Chan parameter), but the value is still displayed.
The parameter is replaced with Setup when you select a Setup for playback or recording. The
Setup parameter functions similarly to Program.
Programs selected in Program Mode or from a Quick Access bank will be selected as the
program on the current RecTrk when you return to Song Mode.
SongMode:MAIN||Events:186K|||STOPPED||||
CurSong:1|NewSong||||||||||||Tempo:120||
RecTrk|:Mult|Vol:127|Pan:64||Mode|:Merge
Chan:4||2|Stereo|Grand|||||||Locat:||1:1
||||||||||||||||||||||||||||||||||||||||
Track||:R|R|R|R|R|R|R|R|R|R|R|R|R|R|R|R|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
Channel (Chan)
This parameter determines the control channel and is only available when the RecTrk is set to
None or Mult. The Program parameter value remains on the display and can be edited, even
though the parameter's name, "ProgramÓ, no longer appears.
Setup
Displays the ID# and name of Setup to be recorded. This parameter is available by setting
RecTrk to Mult, then entering Setup mode momentarily by pressing the SETUP button
followed by the SONG button to return to Song mode. The screen below shows an example of
the Song mode page with the Setup parameter displayed.
SongMode:MAIN||Events:186K|||STOPPED||||
CurSong:1|NewSong||||||||||||Tempo:120||
RecTrk|:Mult|Vol:127|Pan:64||Mode|:Merge
Setup||:4|Total|Orchestra|||Locat:||1:1|
||||||||||||||||||||||||||||||||||||||||
Track||:R|R|R|R|R|R|R|R|R|R|R|R|R|R|R|R|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
Song Mode
MAIN Page
12-13