Table of Contents
Advertisement
25 ADJUSTMENT
Reference 1:
The characters entered in the data field of each
data item will be shifted to the left one after an-
other.
Reference 2:
When the number of entered characters exceeds
10, the leftmost character will disappear.
[9] Setting Passwords
This function allows you to set the following passwords:
1. Key operator password (4 digits)
This password is required to enter the key
operator mode.
2. EKC master key code (8 digits)
3. Weekly timer password (4 digits)
This is a weekly timer master key code required
to enter various weekly timer setting modes.
This function cannot be used when the machine
is not equipped with a weekly timer.
Step
1
Enter the 25 mode.
2
[25 Mode Menu Screen]
Select "
Password Setting."
6
3
[Password Setting Screen]
Select "Key operator password (4 digits),"
"EKC master key code (8 digits)," or
"Weekly timer password (4 digits)."
4
Enter a new password using numeric
keys.
5
Perform steps 3 and 4 repeatedly to set
other passwords.
6
Press the
OK
passwords to take effect.
To cancel the new passwords, press the
button.
CANCEL
Pressing either button will display the 25
Mode Menu screen again.
Operation
button to allow the new
Reference 1:
The digits entered in the data field of each data
item will be shifted to the left one after another.
Reference 2:
When the number of entered digits exceeds 4 or
8, the leftmost character will disappear.
Reference 3:
Setting the key operator password, weekly timer
password, and HDD management password to
"0000" allows you to use individual modes.That
is, the menu screen of each mode appears di-
rectly without displaying the password input
screen.
1 - 48
Advertisement
Table of Contents
