Table of Contents
Advertisement
When any one of the following abnormality occurs, the user can disconnect the faulty unit temporarily. When
a warning code is displayed, press the RESET button and turning the main switch OFF/ON according to the
LCD message allows you to use the machine until you turn the main switch OFF/ON again.
Warning code
F18-10
F18-20
F18-30
F13-02
F18-40
F46-40 to 43
F67-01 to 08
F77-24 to 26
F77-31 to 37
F77-41
F77-54 to 55
Cause
Tray 1 lifting abnormality
Tray 2 lifting abnormality
Tray 3 lifting abnormality
LT paper feed motor abnormality
Tray 4 (LCT) lifting abnormality
HDD abnormality
DF drive abnormality
Folding/stapling abnormality
Trimmer drive abnormality
PI abnormality
PU abnormality
4 - 71
ERROR CODE LIST
Unit to be disconnected
Tray 1
Tray 2
Tray 3
Tray 4
HDD
RADF
Folding/stapling unit
TU
PI
PU
Advertisement
Table of Contents
