Table of Contents
Advertisement
ERROR CODE LIST
Warning
Classification
code
FN-104/FN-4
F77-11
abnormality
F77-12
F77-15
F77-21
F77-22
F77-23
F77-24
Causes
PS33(clincher HP/F) and PS34(stapler
HP/F) do not go ON within the
specified time after the start of
M23(clincher/F) and M24(stapler/F)
operation.
PS30(clincher HP/F) and PS31(stapler
HP/F) do not go ON within the
specified time after the start of
M21(clincher R) and M22(stapler R)
operation.
M1(FNS conveyance) does not reach
the prescribed speed within the
specified time after the start of its
operation.
PS23(stapling and folding stopper
HP) does not go ON within the
specified time after M14(stapling and
folding stopper) starts operation of
HP detection.
PS24(alignment plate/lower HP)
does not go ON within the specified
time after M15(alignment plate/lower)
starts operation of HP detection.
PS21(stapling and folding stopper
release HP) does not go ON within
the specified time after M17(stapling
and folding stopper release) starts
ope-ration of HP detection.
PS27(folding stopper HP) does not
go ON within the specified time after
M18(folding stopper) starts operation
of HP detection.
4 - 68
Operation in case of
Estimated abnormal
warning occurrence
The main body and
FNS CB (FNS control
FNS are stopped
board)
immediately. RL1
RB (relay board)
(main) is turned
M23 (clincher/F)
OFF.
M24 (stapler/F)
PS33 (clincher HP/F)
PS34 (stapler HP/F)
FNS CB (FNS control
board)
RB(relay board)
M21(clincher/R)
M22(stapler/R)
PS30(clincher HP/R)
PS31(stapler HP/R)
FNS CB (FNS control
board)
M1(FNS conveyance)
FNS CB (FNS control
board)
RB (relay board)
M14 (stapling and
folding stopper)
PS23 (stapling and
folding stopper HP)
FNS CB (FNS control
board)
RB (relay board)
M15 (alignment
plate/lower)
PS24 (alignment
plate/lower HP)
FNS CB (FNS control
board)
RB (relay board)
M17 (stapling and
folding stopper
release)
PS21 (stapling and
folding stopper
release HP)
FNS CB (FNS control
board)
M18 (folding stopper)
PS27 (folding
stopper HP)
parts
Advertisement
Table of Contents
