Table of Contents
Advertisement
JAM CODE LIST
Jam
Classification
code
EDH-2
J65-20
J65-40
FN-104/FN-4
J71-1
TMG-1
J71-2
FN-104/
J72-16
FN-4
J72-17
J72-18
J72-19
J72-20
J72-21
J72-22
J72-23
J72-24
Cause
PS314(original exit 2) is ON during
idling.
PS304(reverse jam detection) is
ON during idling.
The front cover or exit cover is
opend during copying.
The front door is opend during
copying, or the stacker door is
opend during trimmer operation.
PS4(FIN entrance passage) is not
turned ON within the specific time
after the main body paper exit PS
is turned ON.
PS10(paper exit 2) is not turned
ON within the specific time after
PS4(FIN entrance passage) is
turned ON.
PS5(stacker conveyance passage) is
not turned ON within the specific time
after PS4(FIN entrance passage)
is turned ON (in staple mode).
PS5(satcker conveyance passage) is
not turned OFF within the specific
time after it turns ON.
PS6(paper exit 1) is not turned ON
within the specific time after the
paper exit operation is started (in
staple mode).
PS6(paper exit 1) is not turned
OFF within the specific time after it
turns ON after the paper exit
operation is started (in staple
mode).
PS1(subtray paper exit) is not
turned ON within the specific time
after PS4(FIN entrance passage)
is turned ON (in subtray paper exit).
PS1(subtray paper exit) is not
turned OFF within the specific time
after it turns ON (in subtray paper
exit).
PS28(folding passage/1) is not
turned ON within the specific time
after the staple is completed.
4 - 38
Countermeasure
Machine response
RADF stops immedi-
Open the movable
ately.
cover and remove
If there is a paper in
jammed paper.
or after the copying
process, the machine
stops after completion
of paper ejection.
FNS/main body stops
Remove jammed
immediately.
paper from FNS/
main body if present.
Advertisement
Table of Contents
