Table of Contents
Advertisement
Jam
Classification
code
FN-104/
J72-25
FN-4
J72-26
J72-27
J72-28
J72-29
J72-30
TMG-1
J72-32
J72-33
J72-34
Cover
J72-35
Inserter A
J72-36
J72-37
PK-1
J72-38
J72-39
Cause
PS25(folding paper exit) is not
turned ON within the specific time
after folding is completed.
PS25(folding paper exit) is not
turned OFF within the specific
time after it turns ON.
PS20(stacker no paper detection)
is OFF when the staple is started.
PS5(stacker conveyance passage)
is not turned OFF within the specific
time after it turns ON.
PS10(paper exit 2) is not turned
OFF within the specific time after
it turns ON.
PS6(paper exit 1) is not turned
OFF within the specific time after
it turns ON.
PS101(entrance) is not turned ON
within the specific time after
PS25(folding paper exit) turns ON.
PS102(conveyance) is not turned
ON within the specific time after
PS101(entrance) turns ON.
The paper has not pass the
PS108(exit) within the specific time
after M101(conveyance) turns ON.
PS201(sheet passage) is not
turned ON within the specific time
after MC201(paper feed) is turned
ON.
PS5(stacker conveyance passage)
is not turned ON within the specific
time after PS201(sheet passage) is
turned ON.
PS10(paper exit 2) is not turned
ON within the specific time after
PS201(sheet passage) is turned
ON.
Leading/trailing/side edge PS on
paper edge PS is not turned ON
within the specific time after the
main body paper exit PS is turned
ON.
Leading/trailing/side edge PS on
paper edge PS is not turned OFF
within the specific time after it
turns ON.
4 - 39
Machine response
Countermeasure
FNS/main body stops
Remove jammed
immediately.
paper from FNS/main
body if present.
PU/main body stops
Remove jammed
immediately.
paper from PU/main
body.
JAM CODE LIST
Advertisement
Table of Contents
