Minolta DI750 - MANUAL SERVICE Service Manual page 114

Classi- Code Symbol
fication
— —
031 M13
032 M17
034
040 M1
041 M2
042
043
045 M16
046 M23
047 M18
048
049 M18/M23
* Caution: When the START key is pressed, "Watch input?"
selected for each code, the following operation is performed:
*1 : Performs HP search and scanner to-and-fro operations.
YES
: Moves the scanner 10 mm to the right.
NO
*2 : Turns ON the polygon motor and write unit cooling fan.
YES
: Turns ON the polygon motor for 30 seconds.
NO
*3 : Performs HP search and shading operations.
YES
: Moves the scanner 10 mm to the right.
NO
M u l t i
mode
—
*1 Scanner drive motor
*2 Polygon motor
M
0: 400 dpi 1:600dpi
*3 Shading correction
M
0: 400 dpi 1:600dpi
Main motor
Drum drive motor
Fan motor
1: Scanner cooling fan
2: Write unit cooling fan (fast)
3: Write unit cooling fan (slow)
4: Developing suction (fast)
5: Developing suction (slow)
M
6: Main unit cooling fan 1 (fast)
7: Main unit cooling fan 1 (slow)
8: Main unit cooling fan 2 (fast)
9: Main unit cooling fan 2 (slow)
10: Main unit cooling fan 3 (fast)
11: Main unit cooling fan 3 (slow)
12: Fixing unit cooling fan
Counter
M
1: Total counter 2: Key counter
M 6: Cleaning web drive motor
Charger cleaning motor
M
0: To-and-fro operation 1: Move to rear 2: Move to front
Transfer/separaton cleaning motor
M
0: To-and-fro operation 1: Move to rear 2: Move to front
Control panel LED test (turn on all lights)
Charger cleaning or transfer/separation
cleaning motor to-and-fro operation
1 - 93
Name
appears. When
YES NO
47 ADJUSTMENT
or is
YES NO