Table of Contents
Advertisement
Jam
Classification
code
Tray 3
J13-1
J13-2
J13-3
J13-4
J13-5
C-305
J14-1
J14-2
J14-3
J14-4
Paper feed
J17-1
and
conveyance
(common
to all trays)
Cause
PS52 (paper pre-registration 3) is
not turned ON within the specified
time after MC8 (pre-registration
MC3) is turned ON.
PS51 (paper feed 3) is not turned
ON within the specified time after
MC7 (feed MC3) is turned ON.
PS19 (vertical conveyance 3) is
ON during idling.
PS51 (paper feed 3) is ON during
idling.
PS52 (paper pre-registration 3) is
ON during idling.
PS107 (LT first paper feed
detection) is not turned ON within
the specified time after MC102
(LT first paper feed MC) is turned
ON.
PS106 (LT feed detection) is not
turned ON within the specified
time after MC101 (LT feed drive
MC) is turned ON.
PS106 (LT feed detection) is ON
during idling.
PS107 (LT first paper feed
detection) is ON during idling.
PS44 (registration) is not turned
ON within the specified time after
PS54 (loop) or PS46 (ADU exit)
is turned ON.
4 - 31
Countermeasure
Machine response
If there is a paper in
Open the vertical
copying
process
conveyance door of
when this jam occurs,
the main body and
the machine stops
remove the jammed
after completion of
paper.
paper ejection.
Remove the tray
and remove the
jammed paper.
Open the vertical
conveyance door of
the main body and
remove the jammed
paper.
Open the vertical
conveyance jam
door of the main
body and remove
the jammed paper.
Remove the tray
and remove the
jammed paper.
If there is a paper in
Open
copying
process
cover and remove
when this jam occurs,
the jammed paper.
the machine stops
Open the LCT door
after completion of
and remove the
paper ejection.
jammed paper.
If there is a paper in
Open the right door,
copying
process
draw out the ADU,
when this jam occurs,
open the paper
the machine stops
registration and
after completion of
loop roller unit jam
copied paper ejection.
removal mecha-
nism
access guide B,
and remove the
jammed paper.
JAM CODE LIST
the
LCT
and
jam
Advertisement
Table of Contents
