Table of Contents
Advertisement
OTHER ADJUSTMENT
a.
Adjustment Method
Step
1
Raise the up/down plate.
2
Open the top cover.
3
Remove the four screws to detach the
side cover (right).
Side cover
(right)
4
Open the jam access door, then remove
the four screws to detach the front cover.
Jam access door
Screws
Side cover (right)
Operation
Screws
Screws
Screws
1 - 104
5
Remove the two screws to detach the
clutch replacement cover.
Clutch replacement cover
Screws
6
Remove the five screws to detach the
rear cover.
Screws
7
Loosen the two screws and adjust the
position of each paper up/down plate drive
pully using an adjustment screw so that
the front and rear of the paper up/down
plate are at the same height.
8
Secure the paper up/down plate drive
pulleys by tightening the two screws (per
up/down pulley) .
9
Install the rear cover, clutch replacement
cover, front cover, and side cover (right).
Screw
Rear
cover
Screws
Advertisement
Table of Contents
