Table of Contents
Advertisement
36 ADJUSTMENT
4.
Printer lead edge timing adjustment
Adjusting the printer lead edge timing (Image eras-
ure amount).
Step
1
Enter the 36 mode.
2
[36 Mode Menu Screen]
Press "
Image adjustment."
2
3
[Image adjustment mode menu Screen]
Press "
Timing adjustment."
3
4
[Timing adjustment mode menu Screen]
Press "
Printer lead edge timing adj."
4
5
[Printer lead edge timing adjustment
Screen]
Press the
COPY SCREEN
6
Select A3 (11x17) -size paper, place pyra-
mid chart on original glass, and press the
Start button.
7
Check the printer leading edge blank cut
amount.
Specification: within 3 mm
8
If the printer leading edge blank cut
amount is not appropriate, press the C
button while pressing the Utility button.
9
[Printer lead edge timing adjustment
Screen]
Enter a value with the numeric keys and
Press the
SET
Setting range: -20 to +40
1 step=0.1 mm
10
Repeat steps 5 to 10 until the printer lead-
ing edge blank cut amount is within speci-
fication.
11
Press the
PREVIOUS SCREEN
turn to the Timing adjustment mode menu
Screen.
Operation
key.
key.
key to re-
1 - 64
5.
Scanner restart timing adjustment
Adjusting the scanner restart timing during platen
copy.
Caution: Printer restart timing adjustment must
be completed before performing this ad-
justment.
Step
1
Enter the 36 mode.
2
[36 Mode Menu Screen]
Press "
Image adjustment."
2
3
[Image adjustment mode menu Screen]
Press "
Timing adjustment."
3
4
[Timing adjustment mode menu Screen]
Press "
Scanner restart timing."
5
5
[Scanner restart timing adjustment
Screen]
Press the
COPY SCREEN
6
Select A3 (11x17) -size paper, set a
pyramid chart on the original glass, and
press the Start button.
7
Check the tip timing.
Specification: within 3 mm
8
If the leading edge timing is not appropri-
ate, press the C button while pressing
the Utility button.
9
[Scanner Restart Timing Adjustment
Screen]
Enter a value with the numeric keys and
press the
SET
Setting range: -60 to +20
1 step=0.1 mm
10
Repeat steps 5 to 10 until the leading
edge timing is within specification.
11
Press the
PREVIOUS SCREEN
turn to the Timing adjustment mode menu
Screen.
Operation
key.
key.
key to re-
Advertisement
Table of Contents
