Saving Or Restoring Configuration Settings - SMC Networks 8124PL2 - annexe 1 Management Manual

Configuring the Switch
CLI – Enter the IP address of the TFTP server, select "config" or "opcode" file type,
then enter the source and destination file names, set the new file to start up the
system, and then restart the switch.
.
Console#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: v1000-18.bix
Destination file name: V1.0
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#config
Console(config)#boot system opcode:V1.0
Console(config)#exit
Console#reload

Saving or Restoring Configuration Settings

You can upload/download configuration settings to/from a TFTP server. The
configuration file can be later downloaded to restore the switch's settings.
Command Attributes
• File Transfer Method – The firmware copy operation includes these options.
• file to file – Copies a file within the switch directory, assigning it a new name.
• file to running-config – Copies a file in the switch to the running configuration.
• file to startup-config – Copies a file in the switch to the startup configuration.
• file to tftp – Copies a file from the switch to a TFTP server.
• running-config to file – Copies the running configuration to a file.
• running-config to startup-config – Copies the running config to the startup config.
• running-config to tftp – Copies the running configuration to a TFTP server.
• startup-config to file – Copies the startup configuration to a file on the switch.
• startup-config to running-config – Copies the startup config to the running config.
• startup-config to tftp – Copies the startup configuration to a TFTP server.
• tftp to file – Copies a file from a TFTP server to the switch.
• tftp to running-config – Copies a file from a TFTP server to the running config.
• tftp to startup-config – Copies a file from a TFTP server to the startup config.
• TFTP Server IP Address – The IP address of a TFTP server.
• File Type – Specify config (configuration) to copy configuration file.
• File Name — The configuration file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the maximum length
for file names on the TFTP server is 127 characters or 31 characters for files on
the switch. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_")
3-20
4-64
4-69
4-21