System Defaults - SMC Networks 6724AL2 Management Manual

S M
WITCH ANAGEMENT

System Defaults

The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file
should be set as the startup configuration file.
(See "Setting the Startup Configuration File" on page 2-26.)
The following table lists some of the basic system defaults.
Function
IP Settings
Web Management HTTP Server
SNMP
Security
1-14
Parameter
Management VLAN
DHCP
BOOTP
User Specified
IP Address
Subnet Mask
Default Gateway
HTTP Port Number
Community Strings
Authentication Failure Traps
Link-up-Down Traps
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec from
Normal Exec Level
Authentication
Default
1
Enabled
Disabled
Disabled
0.0.0.0
255.0.0.0
0.0.0.0
Enabled
80
"public" (read only)
"private" (read/write)
Enabled
Enabled
Username "admin"
Password "admin"
Username "guest"
Password "guest"
Password "super"
Local