System Defaults - SMC Networks 6152L2 - annexe 1 Management Manual

Multicast Filtering – Multicast filtering is a system where network
devices forward multicast traffic only to the ports that are registered with
the multicast group. Without mulicast filtering the data packet will be
broadcast to all endstations within a LAN or VLAN. The purpose is to
keep the non-multicast group members from receiving unsolicited packets
and to prevent a possible reduction in network performance. The switch
uses IGMP Snooping and Query at Layer 2 and IGMP at Layer 3 to
manage multicast group registration.

System Defaults

The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file
should be set as the startup configuration file (page 3-27).
The following table lists some of the basic system defaults.
Function
Console Port
Connection
Authentication
Table 1-2. System Defaults
Parameter
Baud Rate
Data bits
Stop bits
Parity
Local Console Timeout
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec from
Normal Exec Level
RADIUS Authentication
TACACS Authentication
802.1x Port Authentication
HTTPS
SSH
Port Security
S D
YSTEM
Default
9600
8
1
none
0 (disabled)
Username "admin"
Password "admin"
Username "guest"
Password "guest"
Password "super"
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
EFAULTS
1-7