Port Configuration; Displaying Connection Status - SMC Networks 6152L2 - annexe 1 Management Manual

C
ONFIGURING THE

Port Configuration

Displaying Connection Status

You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Field Attributes (Web)
• Name – Interface label.
• Type – Indicates the port type.
(1000BASE-T, 1000BASE-SX, 1000BASE-LX or 100BASE-FX)
• Admin Status – Shows if the interface is enabled or disabled.
• Oper Status – Indicates if the link is Up or Down.
• Speed Duplex Status – Shows the current speed and duplex mode.
(Auto, or fixed choice)
• Flow Control Status – Indicates the type of flow control currently in
use. (IEEE 802.3x, Back-Pressure or None)
• Autonegotiation – Shows if auto-negotiation is enabled or disabled.
• Media Type
• Trunk Member
• Creation
via LACP.
1: Port Information only.
2: Trunk Information only
3-108
S
WITCH
1 – Indicates the type of media used for ports 49 to 52.
1 – Shows if port is a trunk member.
2
– Shows if a trunk is manually configured or dynamically set