Wlan Interface General Screen - ZyXEL Communications ZyWall USG 50-H Series User Manual

Table 57 Network > Interface > Tunnel > Edit (continued)
LABEL
Related Setting
Add this
interface to
TRUNK for WAN
load balance.
TRUNK
WAN TRUNK
Policy Route
OK
Cancel

8.10 WLAN Interface General Screen

The following figure provides an example of a wireless network. The wireless network is in
the blue circle. Wireless clients (A and B) connect to an access point (AP) to access other
devices (such as the printer) or the Internet. Your ZyWALL works as an AP when you install a
compatible WLAN card.
Figure 144 Example of a Wireless Network
• Every device in a wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentity.
• Different wireless networks in the same area should use different channels.
ZyWALL USG 50-H User's Guide
DESCRIPTION
Select this option to use the interface as part of a WAN trunk for load balancing.
This option is available for the WAN interfaces. Click this link to go to a screen
where you can set this interface to be part of a WAN trunk for load balancing.
Click this link to go to a screen where you can configure WAN trunk load
balancing.
Click this link to go to the screen where you can manually configure a policy
route to associate traffic with this interface.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
Chapter 8 Interface
183