Device Model Add/Edit - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

The following table describes the fields in this screen.
Table 120 Customize > Device
LABEL
Name
Search
Add
Edit
Remove
Preview
check box
Preview
Model Name
Category
SysObjectID
F/W Version OID
CPU OID
Amount

9.5.1 Device Model Add/Edit

Use this screen to configure a device model. Before you configure a device model in this screen,
you must know its MIB object ID and firmware version object ID. Each device model should
associate with an existing or a new device icon (uploaded through the Maintenance > Customize
ENC User's Guide
DESCRIPTION
Enter a part or full name of a device model for which to search.
Click this to perform the search.
Click this to create a device model in the ENC.
Click this to modify a selected device model.
Click this to delete selected device model(s).
Click this to view the full-size device icon for a selected device model.
Figure 190 Icon Preview
Select the check box of an entry and click Edit, Remove or Preview to take
the action for the entry respectively. Select or clear the check box at the table
heading line to select or clear all check boxes in this column.
This field displays the thumbnail-size icon for a device model in the ENC.
This field displays the name of the device model.
This field displays the model of the device.
This field displays the MIB object ID of the device model.
This field displays the firmware version object ID of the device model so that
the ENC can retrieve the firmware version through SNMP.
This field displays the CPU object ID of this device model so that the ENC can
get the CPU usage through SNMP.
This field displays the number of managed devices that belong to this device
model.
Chapter 9 Maintenance
249