Inventory Of Devices - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual
Network management system
Hide thumbs
Also See for ENTERPRISE NETWORK CENTER:
- Quick start manual (15 pages) ,
- Brochure (6 pages)
Table of Contents
Advertisement
Chapter 6 Tool
The following table describes the labels in this screen.
Table 50 Tool > Auto-Discovery > Add Discovery Filter
LABEL
DESCRIPTION
Status
Select Active to enable this filter rule or clear this to disable it.
Property
Select the parameter of this rule. The available options are Device Type, Model Name, Host
Name, IP Address and sysOid. sysOid means the SNMP object identifier of a MIB object.
Note: Make sure you have configured correct SNMP settings (versions and community) to use
Operator
Select the comparison operator for the rule. The available options vary depending on the
Property you selected. They are equals, contains, starts with or ends with.
Values
Select or enter the corresponding value according to the Property you selected.
Cancel
Click Cancel to close this screen without saving the settings.
Ok
Click Ok to save the settings.
6.2 Inventory of Devices
Use this screen to look for devices in the OTV panel and their information such as IP address,
current status, firmware version, and so on.
140
device type (see
Table 51 on page 142
for all available device types) as the filters.
ENC User's Guide
Advertisement
Table of Contents
Troubleshooting
