Register Multiple Nwa1300-N Series Aps - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 2 Tutorials
Select 1F-Switch-A in the Device panel and then click the Port Setting tab. Configure additional
8
VLAN settings in this screen. For example, select Ingress Check and configure the Port VID for
each port. Click Apply.
Figure 57 Port VLAN Settings

2.10 Register Multiple NWA1300-N Series APs

You can use the ENC and NWA1300-N Series for hotel management. There are three common
methods for the device registration to the ENC. You can choose one of the following methods
according to your condition.
Table 18 Methods of Registering NWA1300-N Series to the ENC
METHOD DESCRIPTION
1
2
3
74
Devices use a dynamic IP address with DHCP
option 224 and register to the ENC actively. See
Section 2.10.1 on page 75.
Devices use a static IP address and the
administrator has to manually register them to
the ENC. See Section 2.10.2 on page
Devices use a dynamic IP address and the ENC
adds them to the registration list through the
Auto-Discovery function. See
page 78.
ADDITIONAL REQUIREMENTS
• A DHCP Server which supports DHCP
option 224
• A mapping list between the device MAC
addresses and room numbers
77.
• A DHCP Server without DHCP option 224
support
Section 2.10.3 on
ENC User's Guide