Customize Device Models - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Network management system
Hide thumbs Also See for ENTERPRISE NETWORK CENTER:
Table of Contents

Advertisement

Chapter 9 Maintenance
The following table describes the fields in this screen.
Table 119 Server
LABEL
Server Configuration
Server IP/Domain
Client Login Lockout
Maximum Retry
Count
Lock Period
User Change
Password Period
Mail Relay
SMTP Server IP/
Domain
Sender Mail
Authentication
User Name
Password
Apply
Reset

9.5 Customize Device Models

The ENC provides some default device models (such as Switch, Router/Gateway, Firewall,
Wireless AP, and so on). The device types are applied to device settings on the ENC when devices
are discovered or manually added to the ENC. Use this screen if you want to customize a device
type (for example, for a new ZyXEL device or non-ZyXEL device). To open this screen, click
Maintenance > Customize.
Figure 189 Customize > Device
248
DESCRIPTION
Type a new IP address or domain name if you want to change the current
setting.
The ENC can lock a user out if you use a wrong user name or password to log
in the ENC.
Enter up to how many times a user can re-enter his/her account information
before the ENC locks the user out.
Enter the number of minutes for the lockout period. A user cannot log into the
ENC during the lockout period, even if he/she enters correct account
information.
Enter the maximum number of days within which a user must change his
password for the ENC login. If the user does not change his/her password
within the configured time, the ENC will show a reminder when the user logs in
next time. 0 means unlimited.
Enter the IP address or domain name of a mail server. The ENC will send
notifications to users through this mail.
Enter a valid e-mail address. This is the sender's e-mail address that you want
to show to mail receivers.
Select this if authentication is required for the mail server login.
Enter the user name for the mail server login.
Enter the corresponding password for the mail server login.
Click this to save the changes.
Click this to discard the changes and exit the screen.
ENC User's Guide

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents