Add Static Mac Forwarding; Authentication Overview - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 8 Application

8.10.4 Add Static MAC Forwarding

Use this screen to configure a static MAC forwarding rule. Click Add in the Static MAC Forwarding
section of the Application > Port Management > Security screen to open the screen.
Figure 173 Port Management > Security > Static MAC Forwarding - Add
The following table describes the labels in this screen.
Table 106 Port Management > Security > Static MAC Forwarding - Add
LABEL
Rule Activate
MAC Address
VID
Port
Cancel
OK

8.11 Authentication Overview

Authentication is the process of determining who a user is and validating access to the device. The
device can authenticate users who try to log in based on user accounts configured on the device
itself. The device can also use an external authentication server to authenticate a large number of
users.
228
DESCRIPTION
Select this to activate your rule. You may temporarily deactivate a rule without
deleting it by clearing this check box.
Enter the MAC address in valid MAC address format, that is, six hexadecimal
character pairs.
Note: Static MAC addresses do not age out.
Enter the VLAN identification number.
Enter the port where traffic from the MAC address entered in the previous field will
be automatically forwarded.
Click this to discard the changes and close the screen.
Click this to save the changes and close the screen.
ENC User's Guide