ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 109

Table 32 Configuration > Script Distribution > Add (continued)
LABEL
Add
Remove
check box
Device Name
IP Address
Model Name
Commands
ENC User's Guide
DESCRIPTION
Click this to open screens where you can add devices to the list.
In the By Search screen, select the individual managed devices to which you want
to apply the script. You can display the list of available devices by OTV, device view,
or group view. Click OK.
Figure 73 Select Devices - By Search
Select an entry and click this to delete it from the list.
Select the check box of an entry and click Remove to delete it. Select or clear the
check box at the table heading line to select or clear all check boxes in this column.
This field displays the name of each managed device to which you want to apply the
script.
This field displays the corresponding IP address of each listed managed device.
This field displays the name of the device model for each listed managed device.
Use this section to list the commands you want to run on the selected managed
devices.
Use a pound sign '#' in the beginning of a line for a note. Use a pipe character '|'
followed by keywords that identify whether the script has failed or not. If the entire
keywords can be found in the command output, the script continues. Otherwise, the
ENC terminates the script and returns "failed".
This is an example:
show ip | ip interface
#A command of 'show ip' is included in this script. The ENC will check whether the
command output contains 'ip interface'. If it does not, it stops this command and
returns 'failed'. The script continues if there is the next command.
Chapter 4 Configuration
109