Log - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 9 Maintenance
Table 130 Registration
LABEL
Authentication Code
(A/C)
License Key
Upgrade

9.10 Log

Use this screen to view specific ENC system logs based on the time period, severity level, event
category, and/or message content that you specified in this screen. To open this screen, click
Maintenance > Log.
Figure 204 Log
The following table describes the fields in this screen.
Table 131 Log
LABEL
Time
Severity
260
DESCRIPTION
This field displays the authentication code for the ENC. The A/C is a unique
number that identifies this installation of the ENC. You have to enter this
number in myZyXEL.com if you log in to myZyXEL.com directly.
Enter your iCard's PIN number and click Upgrade to activate the standard
version from trial or extend the number of devices the ENC can support.
If you reach the maximum number of devices the ENC can support and you
want to extend the number, you need to buy a new iCard (specific to the ENC).
Enter the new PIN number in this screen to increase the number.
Click Upgrade to apply a license to the ENC.
DESCRIPTION
Select within the number of hours or days in the past during which the ENC's
system logs were generated for the search criteria.
The log severity level from high to low are Fatal > Error > Warn > Info.
Select the comparison expression for the logs you want to see. The options are
greater than or equal to (>=), equal to (=), and less than or equal to (<=).
For example, select ">= Error" if you want to see the fatal and error logs.
ENC User's Guide