Default Mibs - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

To open this screen, click Tool > MIB Loader > User Loaded MIBs.
Figure 112 Tool > MIB Loader > User Loaded MIBs
The following table describes the labels in this screen.
Table 65 Tool > MIB Loader > User Loaded MIBs
LABEL
Load
Unload
check box
File Name
Module Name

6.7.2 Default MIBs

Use this screen to view the default MIBs the ENC stores view default MIBs that came with the ENC
when the ENC was installed.
ENC User's Guide
DESCRIPTION
Click this to upload a MIB file. The following screen appears.
Figure 113 MIB Loader
You have to download the MIB file you want to upload to the computer that you are using to
access the ENC first. Then specify the full path of the MIB file (for example,
c:\Download\example.mib) in the MIB File field or click Browse to locate the file. Click OK
to start the upload. Otherwise, click Cancel to exit this screen.
Select an existing MIB file in the table and click this to delete it from the ENC database.
Select the check box of an entry and click Unload to delete it. Select or clear the check box
at the table heading line to select or clear all check boxes in this column.
This field displays the name of the MIB file.
This field displays the MIB module name retrieved from the MIB file.
Chapter 6 Tool
159