ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 222

Chapter 8 Application
Note: The table columns may vary depending on device models.
Figure 169 Port Management > Broadcast Storm Control
The following table describes the labels in this screen.
Table 104 Port Management > Broadcast Storm Control
LABEL
Activate
Broadcast
Storm Control
Copy
Port
Broadcast
Active
Broadcast(pkt/
s)
Multicast Active
Multicast(pkt/s)
DLF Active
DLF(pkt/s)
224
DESCRIPTION
Select this check box to enable traffic storm control on the device. Clear this check
box to disable this feature.
Click this to copy the selected port's settings to another port. The screen appears
as shown next.
Figure 170 Copy
Specify the port number to which you want to copy the selected port's settings.
Click OK to apply the changes to the Port Management > Broadcast Storm
Control screen. Otherwise, click Cancel to discard the change and close this
screen.
This field displays a port number.
Select this option to enable the limit for the number of broadcast packets the
device receives per second on the port.
Specify how many broadcast packets the port can receive per second.
Select this option to enable the limit for the number of multicast packets the device
receives per second on the port.
Specify how many multicast packets the port can receive per second.
Select this option to enable the limit for the number of destination lookup failure
(DLF) packets the device receives per second on the port.
Specify how many DLF packets the port can receive per second.
ENC User's Guide