ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 40

Chapter 1 Web Configurator
Table 13 Right-click Menus: Add Device
LABEL
Read Community
Write Community
User Name
Context Name
Authentication
Auth. Password
Privacy
Privacy Password
Cancel
Previous
OK
1.3.5.4 Batch Add Devices
Use this screen to add multiple devices to the ENC. To open this screen, right-click the Root
Subnet or a network and select Batch Add Devices.
Note: At the time of writing, this feature is only for NWA1300 Series.
40
DESCRIPTION
Type the read-only community string the ENC uses to view information or
settings on the device.
Type the write community string the ENC uses to change settings on the
device.
Enter the user name of the administrator account on the device.
Enter the context name configured on the device. This setting should be the
same on both the ENC and device in order to communicate with each other.
Select which hash algorithm (None, MD5 or SHA1) to use to authenticate
SNMP packets transmitted between the ENC and the device. SHA1 is generally
considered stronger than MD5, but it is also slower.
This field is available if you selected MD5 or SHA1 in the Authentication
field.
Enter the authentication key, which depends on the authentication algorithm
you selected.
MD5 - a key 16-20 characters long
SHA1 - a key 20 characters long
You can use any alphanumeric characters or ,;|`~!@#$%^&*()_+\{}':./
<>=-". If you want to enter the key in hexadecimal, type "0x" at the
beginning of the key. For example, "0x0123456789ABCDEF" is in hexadecimal
format; in "0123456789ABCDEF" is in ASCII format.
This field is available if you selected MD5 or SHA1 in the Authentication
field.
Select which encryption algorithm to use for SNMP packets transmitted
between the ENC and the device.
None - no encryption key or algorithm
DES - a 56-bit key with the DES encryption algorithm
AES - a 128-bit key with the AES encryption algorithm
This field is available if you selected DES or AES in the Privacy field.
Enter the encryption key with the length according to the Privacy setting.
Click this to exit this screen and go back to the previous screen.
Click this to go back to the last screen.
Click this to save the settings.
ENC User's Guide