ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 64

Chapter 2 Tutorials
The Add Event Action screen appears. Configure the action name (NotifyByMail), enable e-mail
3
notification, configure receiver e-mail addresses. Enter the mail subject and body using the
variables provided in the list boxes. For example, type "A $A event ($B) occurred at $C" where you
click Category of the alarm for first variable $A, Severity of the alarm for second variable $B
and Time when alarm was generated for third variable $C. Click Test Action to make a test.
If you see Send notification successfully, you should receive a mail as shown. See
4
on page 266
Click Events > Configuration > Default, select the Device Down event and click Edit.
5
64
if you get an error message.
Section 10.6
ENC User's Guide