Method 2 - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

2.10.2 Method 2

If you want to configure a static IP address for your NWA1300-N Series devices, you have to
configure them one by one when you install them in each room. You will have to go to a room and
install an NWA1300-N as well as configure the IP address, subnet mask, gateway IP address and
the ENC's IP address. See the device User's Guide for how to do these. After the installation and
turning the devices on, the ENC will add the devices passively after receiving their traps. Then you
can do:
Click each device under the Unspecified Devices folder in the OTV tree and configure the room
1
number. Click Ok to save the change.
Move the devices from the Unspecified Devices folder to an appropriate
2
network or a folder node via drag and drop.
ENC User's Guide
Chapter 2 Tutorials
77