ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 79

Select Entire Network in the Discover Type and enter 1 in the Max. Hop Level field. Click Add
3
and enter the IP address and subnet mask of those devices. In this example, enter 192.168.1.0/
255.255.255.0.
You may need to configure the SNMP community if you have changed the default settings on those
4
devices. Leave this section as the defaults if you have no idea about them.
Note: The SNMP version selection depends on which SNMP versions your devices can
support.
Note: The ENC will fail to get a device's information if the device uses a different read
community.
Select the default discovery filter rule and click Edit, the Edit Discovery Filter screen appears.
5
Select NWA1300-N Series in the Values field. Then click Ok. The ENC will only adds NWA1300-N
Series to the OTV through auto-discovery.
Click the Discover button to start finding devices.
6
After the ENC finds an NWA1300-N Series device, the ENC will automatically configure the device's
ENC IP address setting in order to receive the device's traps later.
ENC User's Guide
Chapter 2 Tutorials
79