Graph View; Firmware Upgrade - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Chapter 4 Configuration

4.1.5 Graph View

If an object in the MIB Browser screen supports displaying information as a graph, click Graph
View to display a graph view screen. You can also click the table view's Switch to Graph View
button to display this screen.
Figure 67 Configuration > MIB Browser > Graph View
The following table describes the labels in this screen.
Table 27 Configuration > MIB Browser > Graph View
LABEL
Polling Interval
Start Polling
Stop Polling
Export to CSV
Graph Type
View Data on host
Filter to View
Close

4.2 Firmware Upgrade

Use these screens to upload firmware files to the ENC and have the ENC use them to upgrade the
firmware on managed devices.
100
DESCRIPTION
Set how often (5 to 3600 in seconds) the ENC should query the monitored
device for the value of the object.
Click this to have the ENC start querying the monitored device for the value
of the object.
Click this to have the ENC halt querying the monitored device for the value
of the object.
Click this to save the results as a Comma Separated Values Excel file on
your computer.
Select whether to display a line, bar, or pie graph.
This read-only field identifies from which managed device the object values
came. Select the items you want in the graph and click Filter to View to
display a graph with the selected items.
Click Close to close the screen.
ENC User's Guide