ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 32

Chapter 1 Web Configurator
The following table describes the labels in this screen.
Table 8 Map > Backgound
LABEL
Background
image
Select Image
Preview
Image Name
Upload
Size
Cancel
Ok
1.3.3.9 Add Link
Use this screen to monitor a connection between two nodes in a Map. To open this screen, click the
Map icon on the left hand of the screen and select Root Subnet in the OTV panel. Hold the [Ctrl]
key and select two nodes in the Map shown on the right, then right-click the nodes and click Add
Link.
Figure 15 Add Link
32
DESCRIPTION
Select whether to change the background image to an existing image or a new
image.
Select which image to which you want to change.
This field displays the selected image's preview.
Enter up to 32 characters for the name of the image. You can use alphanumeric
characters (0-9, a-z, A-Z), underscores (_), and hyphens (-). Spaces are not
allowed.
Click the text box or Browse to specify the image file you want to upload from
your computer to the ENC.
Enter the size of background image in pixels that you want to display in the Map.
Click this to discard the changes and exit this screen.
Click this to save the changes and exit this screen.
ENC User's Guide