Edit A Vlan Group - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

8.6.2 Edit a VLAN Group

Use this screen to configure the selected VLAN's settings. To open this screen, select a device, a
VLAN entry and then click Edit in the Application > VLAN Management screen.
Figure 159 VLAN Management > VLAN Management > Edit
The following table describes the labels in the Edit VLAN Group screen.
Table 96 VLAN Management > VLAN Management > Edit
LABEL
Edit VLAN Group
Activate
Name
Group ID
Port in VLAN Group
Add
Edit
Remove
check box
Port No
ENC User's Guide
DESCRIPTION
Select this to enable the VLAN or clear this to disable it.
Enter a descriptive name for the VLAN for identification purposes.
This field displays the VLAN identifier.
Click this to add a port and configure the VLAN settings.
Select a port in the table and click this to modify the port's VLAN settings.
Click this to delete the selected VLAN(s).
Select the check box of an entry and click Duplicate, Edit or Remove to take the
action for the entry respectively. Select or clear the check box at the table heading
line to select or clear all check boxes in this column.
The port number identifies the port you are configuring.
Chapter 8 Application
213