Method 1 - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

This example uses the following settings:
ITEM
The ENC's IP address
Device's IP address, MAC
address and room
number mapping

2.10.1 Method 1

First of all, make sure you have configured the ENC's IP address in the DHCP server's DHCP option
224 setting. Each of your NWA1300-N Series device will be able to obtain not only an IP address,
subnet mask and gateway IP address but also the ENC's IP address. When an engineer installs an
NWA1300-N series device in a room, he has to write down the device's MAC address and room
number in a list. After installation, the engineer will pass the list to you, the ENC administrator.
Then you can do:
Prepare the mapping list and save it as a text file (list.txt in this
1
example) for later upload. Follow the exact format as shown. Only use
a comma (,) to seperate the MAC address and room number without
leaving any spaces in between.
In the ENC, right-click the Root node in the OTV tree and select Batch Add
2
Devices.
Click Browse to locate the text file
3
and then click Next.
ENC User's Guide
SETTING
192.168.1.250
device 1 192.168.1.1
device 2 192.168.1.2
device 3 192.168.1.3
device 4 192.168.1.4
device 5 192.168.1.5
Chapter 2 Tutorials
00A0C5000101 <-> Room_A101
00A0C5000102 <-> Room_A102
00A0C5000103 <-> Room_A103
00A0C5000104 <-> Room_A104
00A0C5000105 <-> Room_A105
75