Viewing The Table - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

You can also change the RMON owner setting for the port or interface by selecting it and then
clicking Edit in the Application > RMON > Statistics screen.
Note: At the time of writing, this screen is only available for ZyXEL Ethernet Switches
using 3.90 version firmware.
Figure 141 RMON > Statistics > Add/Edit
The following table describes the labels in this screen.
Table 83 RMON > Statistics > Add/Edit
LABEL
Port Number
Owner
Cancel
Ok

8.3.2 Viewing the Table

This screen displays network statistics for the selected port(s) or interface(s) as a table. After
selecting the data source(s) you wish to display, click Table View on the Application > RMON >
Statistics screen to open this screen.
Figure 142 RMON > Statistics > Table View
ENC User's Guide
DESCRIPTION
Enter the number of one port or interface to add to the ENC for viewing network
statistics. This field displays the port's number and is read-only when you are
editing a port statistic entry.
Enter a descriptive name of the application that creates this entry. You can use 1-
31 printable ASCII characters. Spaces are allowed.
Click this to discard all changes and close the screen.
Click this to save the settings and close this screen.
Chapter 8 Application
191