ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 238

Chapter 8 Application
Table 113 AP Manger > AP Configuration (continued)
LABEL
Status
Device Group
Enable Status
Polling
AP Profile
Search
Access Web
GUI
Edit AP Profile
check box
Status
Name
IP Address
MAC Address
AP Profile
Configuration
Status
Device Model
238
DESCRIPTION
Select the device's status (Online, Offline, Un-Monitorer, or Un-Registered)
for the search criteria.
Select the group to which the device belongs.
Select whether the device's status polling is enabled (true) or not (false) for the
search criteria.
Select an AP profile with which the device is applied.
Click this to search the matched device(s) according to your input criteria.
Select a device from the table and click this to access the Web Configurator.
Select a device from the table and click this to edit the applied AP profile.
Select the check box of an entry and click Access Web GUI or Edit AP Profile to
take the action for the entry respectively. Select or clear the check box at the table
heading line to select or clear all check boxes in this column.
This field displays the status of a matched wireless AP.
This field displays the AP's display name.
This field displays the AP's IP address.
This field displays the AP's MAC address.
This field displays the AP profile name the AP is using. N/A displays if you have not
applied any wireless AP profile to the AP.
This field displays the status of the applied AP profile to the AP. The possible values
are:
• N/A - There is no AP profile being applied to the AP.
• Waiting - The AP profile has not yet been applied to the AP because the AP is
unavailable. If you selected Apply it when AP is available in the AP Manger
> AP Configuration > Edit AP Profile screen (see
status before the AP is available.
• Running - The ENC is applying the AP profile to the AP.
• Success - The AP profile has been successfully applied to the AP.
• Fail - The AP profile is failed to be applied to the AP because the AP is
unavailable. If you selected Apply Now in the AP Manger > AP
Configuration > Edit AP Profile screen (see
unavailable at that time, you see this status.
This field displays the AP's model name.
Figure 183), you see this
Figure 183) but the AP was
ENC User's Guide