ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 154

Chapter 6 Tool
To open this screen, click a device in the Name field in the Tool > Inventory > Network screen.
Figure 107 Tool > Inventory > Network
The following table describes the labels in this screen.
Table 60 Tool > Inventory > Network
LABEL
Name
Type
IP Address
Status
Search
View Events
Remove
check box
154
DESCRIPTION
Enter a partial or full name of a network for the search criteria.
Select the type of the network for the search criteria. The options are All, General, Bus,
Star, Ring, Tree. All means any.
Enter a partial or full IP address of a network for the search criteria. You cannot use an
asterisk as a wildcard or a hyphen to search an IP range.
Select the device status in the network that you want to find.
Online - all managed devices in the network are reachable.
Partial Online - some of the managed devices in the network are not reachable.
Offline - all managed devices in the network are not reachable.
Un-monitored - no device is found in the network. This might be caused by a NAT device
that exists between the network and the ENC.
All - select this to include all the status above for the criteria.
Click this to perform the search.
Select one or multiple table entries and click this to view the events about the networks. See
Section 5.1 on page 123 for more information.
Select one or multiple table entries and click this to delete them.
Select the check box of an entry and click View Events or Remove to take the action for
the entry respectively. Select or clear the check box at the table heading line to select or
clear all check boxes in this column.
ENC User's Guide