ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 180

Chapter 7 Report
Table 78 Report > Reports > Add
LABEL
Discovered Date
Category
Ack/Unack
Severity
Period
Source
182
DESCRIPTION
This field is available if you selected the Inventory List Report.
Select how long ago the device(s) that you are looking for were added to the
ENC. Select Custom to display the additional fields in this screen as shown.
Figure 135 Specify a Discover Date
Click the text box next to Start Date or End Date and choose a date (or click
Today) from the displayed calendar. Then click Done. The devices added
during this period will be shown in the report.
This field is available if you selected an Events related report. Select the
category of events that you want to display in the report.
• Threshold Crossing: This is about a parameter's value is higher or lower
than a set threshold.
• Configuration: This is about a configuration change on the ENC.
• Topology: This is about a network topology change detected by the ENC.
• SNMP Traps: This is about SNMP traps sent from Devices.
• All: This means all categories above.
This field is available if you selected an Events related report.
Select whether the events that you want to display have been Acknowledged
or not (Unacknowledged). All means both.
Select the severity of events should be equal to (=), greater or equal to (>=),
less or equal to (<=) a severity level selected on the second drop-down list
box. See Table 73 on page 171
Select how long ago the events that you are looking for were added to the
ENC. Select Custom to display the additional fields in this screen as shown.
Figure 136 Specify a Period
Click the text box next to Start Date or End Date and choose a date (or click
Today) from the displayed calendar. The events added to the ENC during this
period will be shown in the report.
Select which person has acknowledged the events that you are looking for.
for more information about severity.
ENC User's Guide