ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 110

Chapter 4 Configuration
Table 32 Configuration > Script Distribution > Add (continued)
LABEL
Load
Commands
Save
Commands
Clear
Schedule
Time
Cancel
Ok
110
DESCRIPTION
If you have already created and saved command list files, you can click this Load
Commands icon to be able to select which of them you want to use. The following
screen appears.
Figure 74 Load Commands
Select a file and click Ok to load commands from the file to the ENC. Select one or
more files and click Remove if you want to delete them. Click Cancel to exit this
screen without loading any commands.
Click this icon to save the commands listed in the text frame below as a command
list file. The Save Command screen appears.
Figure 75 Save Command
The fields in this Save Command screen are described as following:
• File Name: Enter up to 32 characters for the name of the command list file. You
can use alphanumeric characters (0-9, a-z, A-Z), underscores (_) and hyphen (-
).
• Description: Type additional information for the file in this field.
• Cancel: Click this to discard the changes and exit this screen.
• Ok: Click this to save the changes and exit this screen.
Click this icon to clear the text frame.
Use this section to either apply the commands to the selected managed devices
immediately (Send Now) or schedule it for a specific date and time (Schedule
Time). This time is based on the ENC server's time.
Click this to discard all changes and close this screen.
Click this to save the changes and close this screen.
ENC User's Guide