Add/Edit An Ap Profile - ZyXEL Communications ENTERPRISE NETWORK CENTER Manual

Table 111 AP Manger > AP Profile (continued)
LABEL
Transmit Power
Last Update

8.12.2 Add/Edit an AP Profile

Use this screen to configure a new or an existing wireless AP profile which helps configure multiple
wireless APs at one time. To open this screen, click Add in the Application > AP Manager > AP
Profile screen or select an entry and click Edit in the AP Profile screen.
Note: If you are editing a profile, the ENC will apply the changes to the associated
wireless APs right after you click Ok in this screen.
Figure 181 AP Manager > AP Profile > Add/Edit
The following table describes the labels in this screen.
Table 112 AP Manager > AP Profile > Add/Edit
LABEL
Profile Name
SSID
Channel
ENC User's Guide
DESCRIPTION
This field displays the transmitting power in percentage this wireless AP profile
uses.
This field displays the date and time (yyyy-mm-dd hh:mm:ss) this wireless AP
profile was last time updated.
DESCRIPTION
Enter up to 32 characters for the name of wireless AP profile. You can use
alphanumeric (0-9, a-z, A-Z), underscores (_) and hyphens (-). Spaces are not
allowed.
Enter a descriptive name (up to 32 printable SCII characters) which identifies the
wireless LAN. Wireless clients associating to the access point (AP) must have the
same SSID.
When a wireless client scans for an AP to associate with, this is the name that is
broadcast and seen in the wireless client utility.
Select Auto and a channel set (1, 6, 11 or 1, 4, 7, 11 or 1, 5, 9, 13) if you want
the AP automatically switches a channel within the channel set when the original
channel has problems with wireless interference. Alternatively, select Manual and
a specific channel if you want to fix the channel.
Chapter 8 Application
235