ZyXEL Communications ENTERPRISE NETWORK CENTER Manual page 212

Chapter 8 Application
Table 96 VLAN Management > VLAN Management > Edit (continued)
LABEL
VLAN Join
Tx Tagging
Port VID
Isolation
Cancel
OK
8.6.2.1 Add/Edit a Port
Use this screen to configure the selected port's VLAN settings. To open this screen, click Add or
Edit in the Application > VLAN Management > Edit screen.
Figure 160 VLAN Management > VLAN Management > Edit > Add/Edit
The following table describes the labels in this screen.
Table 97 VLAN Management > VLAN Management > Edit > Add/Edit
LABEL
Port Number
VLAN Join
Tx Tagging
Port Setting
Cancel
OK
214
DESCRIPTION
This field displays Fixed if the port is a permanent member of this VLAN group.
This field displays Normal if the port was dynamically joined to this VLAN group
using GVRP.
Select this if you want the port to tag all outgoing frames transmitted with this
VLAN Group ID.
This field displays the port VLAN ID. If an incoming frame received by the port is
untagged, the device adds the port VLAN ID to the frame.
This field is only available for some ZyXEL Ethernet Switches. Select the check box
to block other ports from communicating with this port.
Click this to discard all changes and close the screen.
Click this to save the settings and close the screen. The ENC configures the port
VLAN settings on the device automatically.
DESCRIPTION
Select the number of a port to configure the port's VLAN settings.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Normal for the port to dynamically join this VLAN group using GVRP.
Select this if you want the port to tag all outgoing frames transmitted with this
VLAN Group ID.
Click this if you want to configure additional VLAN settings for the port.
Click this to discard all changes and close the screen.
Click this to save the settings and close the screen.
ENC User's Guide