Vlan Commands; Gvrp And Bridge Extension Commands; Bridge-Ext Gvrp - SMC Networks TigerStack II SMC8848M Management Manual

VLAN C
OMMANDS

GVRP and Bridge Extension Commands

GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
Command

bridge-ext gvrp

show bridge-ext
switchport gvrp
switchport forbidden vlan Configures forbidden VLANs for
show gvrp configuration
garp timer
show garp timer
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
30-2
Table 30-2 GVRP and Bridge Extension Commands
Function
Enables GVRP globally for the
switch
Shows the global bridge extension
configuration
Enables GVRP for an interface
an interface
Displays GVRP configuration for
the selected interface
Sets the GARP timer for the
selected function
Shows the GARP timer for the
selected function
Mode Page
GC 30-2
PE 30-3
IC 30-4
IC 30-15
NE, 30-4
PE
IC 30-5
NE, 30-6
PE