SMC Networks TigerStack II SMC8848M Management Manual page 419

Table 18-4 Command Group Index (Continued)
Command Group
Rate Limit
Address Table
Spanning Tree
VLANs
Class of Service
Quality of Service
Multicast Filtering
Domain Name
Service
IP Interface
IP Routing
The access mode shown in the following tables is indicated by these
abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
DC (DHCP Server Configuration)
GC (Global Configuration)
IC (Interface Configuration)
LC (Line Configuration)
NE (Normal Exec)
MST (Multiple Spanning Tree)
Description
Controls the maximum rate for traffic transmitted
or received on a port
Configures the address table for filtering specified
addresses, displays current entries, clears the table,
or sets the aging time
Configures Spanning Tree settings for the switch
Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs and protocol VLANs
Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight
for each priority queue, also sets priority for TCP/
UDP traffic types, IP precedence, and DSCP
Configures Differentiated Services
Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a
multicast router
Configures DNS services.
Configures IP address for the switch interfaces;
also configures ARP parameters and static entries
Configures static and dynamic unicast routing
C G
OMMAND ROUPS
Page
27-1
28-1
29-1
30-1
31-1
32-1
33-1
34-1
36-1
37-1
18-13