C
L
OMMAND
INE
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Command Groups
Editing VLAN Groups Sets up VLAN groups, including name, VID and
Configuring VLAN
Interfaces
Displaying VLAN
Information
Configuring Private
VLANs
Editing VLAN Groups
Command
vlan database
vlan
vlan database
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
Default Setting
None
4-198
I
NTERFACE
Table 4-54 VLAN Commands
Function
state
Configures VLAN interface parameters,
including ingress and egress tagging mode,
ingress filtering, PVID, and GVRP
Displays VLAN groups, status, port members,
and MAC addresses
Configures private VLANs, including uplink and
downlink ports
Table 4-55 Editing VLAN Groups
Function
Enters VLAN database mode to add,
change, and delete VLANs
Configures a VLAN, including VID,
name and state
Page
4-198
4-200
4-208
4-209
Mode
Page
GC
4-198
VC
4-199